6082 Aluminium Plate/Sheet (Al Si1 Mg Mn)

We stock from 22swg (0.7mm) to 10" (254mm) thick
We do not just stock the common 2.500m x 1.250m size plates, but also 3.000m x 1.500mm and 4.000 x 2.000m plates as well
the majority of the plate we stock is manufactured to the control stretched stress relieved T651 temper, however some of the thinner thicknesses are stress relieved by roller levelling to the T6 temper, and some of the very thick plates are also T6 as they are too thick to be stretched or roller leveled

We stock M82 plate that is a 6082 plate manufactured to tighter tolerances and with a linished surface protected by vinyl coating

Typical Minimum Properties of T6/T651 Sheet & Plate

thickness
(mm)
0.2 MPa
Proof
Tensile
MPa
Elongation
Hardness
HBS
0.7 - 1.5
260
310
6% (A50)
94
1.5 - 3.0
260
310
7% (A50)
94
3.0 - 6.0
260
310
10% (A50)
94
6.0 - 12.5
255
300
9% (A50)
91
12.5 - 60.0
240
295
8% (A)
89
60.0 - 100.0
240
295
7% (A)
89
100 - 150
240
275
6% (A)
84
150 - 175
230
275
4% (A)
83

To download a print ready PDF of this table click here

6082 Aluminium Extruded Bar (Al Si1 Mg Mn)

We stock from 1/4" to 16" diameter round bar, and a huge range of
Flat Bars, Square Bar, Hexagon Bars, Angles, Channels, Tee's Tubes

Typical Minimum Properties of T6 Bar

Diameter/Width
(mm)
0.2 MPa
Proof
Tensile
MPa
Elongation
A%
< -19.99
250
295
8
20 - 149.9
260
310
8
150-199.9
240
280
6
200 - 250.0
200
270
6

To download a print ready PDF of this table click here